« VMworld 2017: Pivotal Container Services (PKS) | Main | VMworld 2017: re-inventing Data Protection for VMware »

August 29, 2017


Feed You can follow this conversation by subscribing to the comment feed for this post.

Steve Potter

"Imagine that VxRail and VxRack SDDC become closer".

I'm still at a loss as to why there is any significant separation to begin with. They both came from Project Marvin and EVO and from all appearances should have the same code base. Yet, as a customer, I'm fighting with configuration issues on a VxRack deployment that the PS guys keep saying "yeah, we had a similar problem with the SDDC manager code on VxRail early on". Newer versions of VxRail code have fixed the limitations, but it is like the VxRack code was written in a complete vacuum without any knowledge of VxRail.

Chad Sakac

@Steve - thanks for the comment, and apologies for the delay in my response - have been working furiously :-)

There is almost none of the Marvin codebase in VxRail manager anymore, and while "from all appearances" EVO:RAIL and EVO:SDDC shared a name, they were different engineering teams and code-bases. They are also very much in the past :-)

When we made the decision to pivot away from EVO:RAIL - a part of it was that to move fast you need to have a very tightly aligned product team - not people working at arm's length. Building an HCI system means that while the software is PART of the magic, it's very much about how the system comes together. For example - at the most basic level, how do you do low-level systems operations as part of the higher-order life-cycle operations (node add/remove/update).

VxRail took several turns of the crank before we got it working well enough.

Having been through it - we've been working hard with the VMware Cloud Foundation team, and the software that is uniquely in VxRail (not just HW + vSAN) will also start to appear in VxRack SDDC in the new year.

There are other things too - little things, but important for customers... like can we support the same hardware configurations between VxRail and VxRack. The answer clearly should be YES. Right now it's NO. It will be YES - at which point there's another benefit, which is customer will be able to start with VxRail and move to VxRack SDDC.

Again - thanks for the comments!

Verify your Comment

Previewing your Comment

This is only a preview. Your comment has not yet been posted.

Your comment could not be posted. Error type:
Your comment has been saved. Comments are moderated and will not appear until approved by the author. Post another comment

The letters and numbers you entered did not match the image. Please try again.

As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.

Having trouble reading this image? View an alternate.


Post a comment

Comments are moderated, and will not appear until the author has approved them.

Your Information

(Name and email address are required. Email address will not be displayed with the comment.)

  • BlogWithIntegrity.com


  • The opinions expressed here are my personal opinions. Content published here is not read or approved in advance by Dell Technologies and does not necessarily reflect the views and opinions of Dell Technologies or any part of Dell Technologies. This is my blog, it is not an Dell Technologies blog.